Cured-in-place-pipe small diameter inversion rehabilitation system.
The Perma-Lateral™ System is designed for 2” – 8” pipe diameters. The system can be installed through clean-outs or open end pipes. Only one access point is required. The liner can be ambient cured in 3 hours or steam cured in as little as 20 minutes. 2” to 4” diameter pipes can be rehabilitated up to 120FT+ in length, while 5” to 8” diameter pipes can be rehabilitated up to 600FT + in length. This is best selling small diameter pipeline rehabilitation system in North America!
David Keck and the entire Keck Plumbing team, of Quincy, Illinois, has been providing the Perma-Liner™ service since 2013 to the entire circled area on the map on this site.
The Perma-Lateral™ inversion unit does all the work. The installer calibrates the correct inversion pressure while the liner inverts itself through the existing host pipe and the Certified Installer controls the speed to ensure proper installation. Once the liner is inverted and holding pressure, the Installer attaches a special cap to hold pressure during the curing time. The Perma-Lateral™ inversion unit is released and used for the next installation. The liner holding pressure is maintained using a portable air tank.
Benefits & Features
2” to 4” lining, 120FT +
5” to 8” lining, 600FT +
3” to 4” and 4” to 6” pipe flow transitions
Styrene Free Resin
Any Pipe material: Cast, Clay, PVC, etc.
Minimum life span 50-years per ASTM F 1216 Third Party Testing
UPC Listing (Uniform Plumbing Code)
ICC-ES PMG Listing
IRC Listing (International Residential Code)
IPC Listing (International Plumbing Code)
IAPMO Classified Marking
NSF / ANSI Standard 14 Certification and Quality Assurance Program
Third party tested and certified Environmentally Safe/ Odorless Materials
The Perma-Lateral™ ambient cure resin is formulated to meet the installer’s needs. Perma-Liner™ has formulated its resin for all working temperatures. The Perma-Lateral™ epoxy resin will provide you plenty of working time with a 3 hour cure time. The epoxy is pre-formulated and shipped to you in 5 gallon containers. The formulation is a 2-part mix. You simply measure the quantity of resin needed and introduce it into the liner. There’s no waste of materials. This system is user friendly!